Showing 49–60 of 91 results

  • Pneumatic seeder  PK2D

    The <strong>PK2D </strong>model represents the new generation of precision pneumatic sowing machines designed by Agricola Italiana. Equipped with a sliding frame and hydraulic closing movement, it allows large work capacity and minimum transport overall dimensions. Work quality and sowing precision characterise the elements, suitable for operating in the most varied soil conditions (traditional sowing and minimum work).
    Read more
  • Pneumatic seeder  M 815

    The <strong>M-815</strong> is a self-moving sowing machine with hydraulic travel drive system. Equipped with a Diesel or Gas engine, depending on the sowing configuration, it can sow easily even in confined spaces. Versatile and compact, it guarantees the best results in terms of return of investment.
    Read more
  • Pneumatic seeder SNT 2 290

    The <strong>SNT-2-320</strong> model is the most popular sowing machine: simple and compact, it guarantees precision and reliability thanks to its sturdy element.
    Read more
  • Pneumatic seeder AI 640 SN

    Model suitable for sowing all types of vegetables. Its single-bar configuration allows modulating the sowing units, according to the needs.
    Read more
  • FPP Evolution Long Chain

    The <strong>FERRARI FPS transplanter</strong> is suitable for planting a wide variety of vegetables from onions, sweet potatos, leeks, cabbages, tobacco and many others. FPS transplanter can work either with bare root plants or seedlings in a tray. The transplanter yield is <strong>up to 3,500 plants/hour/person</strong> (one planting unit can be fed <strong>by 2 operators if necessary</strong>). FERRARI FPS can work both on flat ground and raised beds.
    Read more
  • FPC Layer and Transplanter

    The <strong>FERRARI FPC transplanting machine</strong> was developed to accomplish simultaneous operations in one pass. This transplanter can lay either polyethylene or biodegradable film to the ground, make holes through the mulch and transplant square block pots. The output is on <strong>average 5,000 plants</strong> per hour on every row. FPC can be either tractor pulled or self-propelled. Different frames are available according to the size of the film roll and the number of rows installed on the machine. Every row is equipped with a plastic belt which is leading the plants to a synchronized system of fingers that are separating the square blocks and are placing them into the holes.
    Read more
  • FMAX Transplanter

    This transplanter can work both on flat ground and raised beds. <strong>F-MAX</strong> is equipped with a self-cleaning kicker installed in the ploughshare. This device is extremely important to prevent the accumulation of dirt in the ground opener. These features are essential to guarantee a more uniform crop that means quality and competitiveness. The <strong>F-MAX</strong> frame can be equipped with a<strong> 3 point </strong>hitch, a draw-bar assembly or a self-propelled unit. The self-propelled version can guarantee: easy maneuverability, reduction of dead times, no need for tractor driver.
    Read more
  • FAST BLOCK Automated Transplanter

    No downtimes and excellent placement of the plant in the ground are the main features of the <strong>“Fastblock”</strong> transplanter. The machine is equipped with modular units and it's available both in hauled and self-propelled version. Fastblock works only with square blocks <strong>(from 3 to 5 cm on each side).</strong> Row width can be adjusted starting from <strong>23 cm</strong> by using a very narrow ploughshare <strong>(only 7.5 cm). </strong>The innovative robotic grabbers can handle both short and tall plants at high speed, without damaging them.
    Read more
  • Floatation washer

    The <strong>floatation washer</strong> can be used instead of the drum washer, to effectively wash your product. <strong>This machine works as follows: </strong>The products are fed into the washer where spray nozzles located at the top and bottom of the tank cause a current. This current cleanse the product causing the various debris to be separated from the flow. The sloped in-feed tank causes this debris to settle at the in-feed end for easy removal. A mesh wire discharge conveyor removes the product from the water and introduces it to a further cleansing fresh water spray.
    Read more
  • Air separator

    <strong>Air separator</strong> After the reception you can pre-clean the beans before the product goes to the de-stoner. This machine is custom made to fit into the line with the correct capacity. The air separator works as follows: The product is conveyed onto the infeed pan where it is evenly distributed through the oscillation of the shaker. It is then fed into the Air Cleaner where it passes over a jet of air created by the bottom mounted fan. This allows for the good product to continue through the Air Cleaner while any debris is lifted up and out of the product stream for immediate removal.
    Read more
  • OctoFrost™ IF Chiller

    The efficient chilling below 5°C in the <strong>OctoFrost™ IF Chille</strong>r hault the blanching or cooking process immediately. This will preserve a superior quality of the processed product and will allow a quick crust-freezing in the OctoFrost IQF freezer. A low infeed product temperature is crucial for a high quality IQF product.
    Read more
  • OctoFrost™ IF Cooker

    Optimal product quality and yield is guaranteed by quick and efficient cooking. No excessive curling, right shrimp color and bite, preserved taste and flavor are the main characteristics of the shrimp passed through the <strong>OctoFrost™ IF Cooker.</strong>
    Read more